The role of drilling machine in the construction of projected window Department: Civil Engineering By: sifypatprojects Project ID: 4524 Rating: (3.3) votes: 6Rate this project12345 Price:₦1000 Get the Complete MaterialAbstractA window is an opening in a wall, door, roof or vehicle that allows the passage of light, sound, and/or air. Modern windows are usually glazed or covered in some other transparent or translucent material, a sash set in a frame[1] in the opening the sash and frame are also referred to as a window. Many glazed windows may be opened, to allow ventilation, or closed, to exclude inclement weather. Windows often has a latch or similar mechanism to lock the window shut or to hold it open by various amounts. Projected aluminum windows are also sometimes called casement windows or sash windows. They are differentiated from fixed windows or sliding windows by the fact that they have‘leafs’ or‘sashes’ that swing out from the window’s outer frame. Casement windows can take one of two forms– top-hung or side-hung. The sashes of top hung windows are attached to the top of the outer frame with movable friction stays, thus allowing the bottom to swing out. Whereas with side-hung windows the sash is attached either on the left or right, allowing the opposite side to swing out. The role of drilling machine in the construction of projected windows is to bore holes been attached to the walls of the buildings and also to give a proper arrangement of the quoted window....Preview Download Preview +Other Civil Engineering project topics and materials you might be interested in»Comparing the compressive strength of concrete made with sand as fine aggregate and with chipping dust as fine aggregate»The comparative study of the compressive strength of concrete made with granite to that made with river round stone (pebble) and local stone»The use of computer in civil engineering»Importance of timber in civil engineering construction»Construction and Installation of a Panel Door»Construction of wardrobe key study on wood work»Effect of street trading on traffic performance and control»Assessment of different types of foundation and their mode of construction»Comparison of soil bearing capacity of different locations in Imo state»Investigation into the suitability of sand and gravel materials commonly used in building construction»Investigating the effect of partial replacement of cement with eggshell powder in concrete production»An investigation in to the causes of cracks in building and possible solutions - a case study of Kukar Gesa community in Katsina metropolis»Suitability of available laterite material in Ilorin East local government area for road construction»Determination of the causes, effects of environmental pollution and its possible control within Kwara and Osun state»Model for prediction of rainfall intensity in Lagos