Home»Electrical Electronics Engineering» Construction of a 2.5kw uninterruptible power supply (UPS) system

Construction of a 2.5kw uninterruptible power supply (UPS) system

 Department: Electrical Electronics Engineering  
 By: usericon tboycity  

 Project ID: 2169
   Rating:  (2.5) votes: 23
Rate this project
Power supplies from the mains supply in Nigeria are neither steady nor clean. Many abnormalities such as spikes, sags (brownouts) surges, and noise can occur. Under the best conditions, power interruptions can be an inconvenience. At their worst, they can cause loss of data in computer systems, damage to vulnerable electronic devices, break in transmission of information and even loss of human life. As a result of these inconveniences, Uninterruptible Power Supply (UPS) systems were constructed to minimize interruptions from Power Supply Units (PSUs). The UPS acts as a buffer and provides clean, reliable power to vulnerable electronic equipment for a certain (short) period of time. At least a time that would be enough to save data and properly shut down the protected machine or effect a power change over. Finally, this project“Uninterruptible power supply (UPS) system” after construction and testing were able to give us an output of 2.5KW which after charged was used to power a computer system and we got a dwell-time of 7-10 minutes. However, after a blackout has occurred, this UPS can provide power to the connected equipment for a short period of time. ...
Preview +
Other Electrical Electronics Engineering project topics and materials you might be interested in
»The construction of a 2kva automatic voltage regulator (AVR)
»Generation of Constant Power Supply from a DC Source
»Construction of digital AC power controller
»A remote controlled AC fan speed regulator using discrete integrated circuit
»Design and construction of a digital clock with calendar
»Remote controlled antenna
»The construction of automatic voltage inverter and a battery charger
»Design of 2.5kw automatic voltage regulation with seven segment display
»Simple sensitive touch alarm
»Construction of a car touch intruder alarm
»Design and installation of 200 WATT solar power system
»Design and construction of 2KVA inverter
»Design and construction of an automatic change over switch
»Automatic college bell with an announcement system
»Construction of a 2.5kw uninterruptible power supply (UPS) system

Upload Project

Do you have project materials to share? Upload and earn with it.