Home»Building Technology» Performance assessment of a used high yield steel and newly obtained reinforcement bars

Performance assessment of a used high yield steel and newly obtained reinforcement bars

 Department: Building Technology  
 By: usericon sagiersageer  

 Project ID: 2498
   Rating:  (3.1) votes: 16
Rate this project
It was discovered that steel can be added to produce a rigid and stable structure because concrete is good in compression while poor in tension and steel reinforcement bar is good in tension. Reinforcing steel is generally provided in the form of bars or welded wire fabric to enhance the bond between steel and concrete and to mechanically inhibit the longitudinal movement of the bar relative to the concrete around it. The steel bar commonly used are high yield bar and having specified yield strength of 46GN/mm2 and mild steel bars are less commonly used in reinforced concrete because they posses less strength of 250N/mm2, mild steel bars can readily be bent are necessary such as for links in narrows beam or columns. Base on the result obtained 8mm, 10mm, and 12mm diameter of USED REINFORCEMENT BARS have less tensile strength than newly reinforcement bars while 16mm diameter has a higher strength of 438N/mm2. All the strength obtained is less than 460N/mm2 specified by British standard. Therefore used reinforcement bars of 16mm diameter can be an alternative use as construction material while 8mm, 10mm, and 12mm would not be suitable as construction materials as per design....
Preview +
Other Building Technology project topics and materials you might be interested in
»Causes of project abandonment in building construction industry and remedial measures
»Causes of construction project failures and abandonments in Nigeria
»Safety procedures and accident prevention methods in construction sites
»Control of Noise Pollution and Sound Insulation in Buildings ( A Case Study of a Broadcasting Studio)
»The implication and benefit of the use of softwares in building project construction (case study of selected software and firm)
»Maintenance and servicing problems of specialist works in building
»The effect of quality control in the building construction process (a case study of Afikpo, Ebonyi state)
»A study of prospects and problems of timber as external material in building production in hot climate region
»The impact of budgeting and budgetary control in construction project delivery in Nigeria
»Use of formwork design and construction of high building
»The use of building survey for maintenance of building in Nigeria ( A case study of one storey building at Owerri, Imo state)
»Challenges of low-cost housing delivery in Nigeria (Case study of Imo state)
»Design and construction of office complex for school of environmental design technology
»Project planning and programming as tools for effective project delivery
»Effects of labour management in building construction site - case study of Owerri, Imo state

Upload Project

Do you have project materials to share? Upload and earn with it.