Home»Electrical Electronics Engineering» Construction of a battery charger

Construction of a battery charger

 Department: Electrical Electronics Engineering  
 By: usericon sifypatprojects  

 Project ID: 4520
   Rating:  (3.2) votes: 11
Rate this project
This project work focuses on the construction of a battery charger. Charging is carried out with the battery charging device and this has taken care of the problem of discontinuity and has enabled optimum use of the battery. The device used for charging is known as a battery charger. This battery charger is automatic in the sense that auto–cutoff has to be incorporated to cut– out the circuit when the battery is fully charged. A battery charger is basically a direct current (DC) power supply designed to induce electrical charges in all rechargeable DC batteries in order to raise the voltage to its standard value. The battery charger constructed here consists of the following: transformer, a rectifier circuit, a switch, a relay, a filter circuit, a voltage regulator, and a Zener diode. The result obtained after the design and construction of a battery charger conformed to the accepted standard of the polytechnic, under Electrical Electronic Engineering....
Preview +
Other Electrical Electronics Engineering project topics and materials you might be interested in
»The construction of a 2kva automatic voltage regulator (AVR)
»Generation of Constant Power Supply from a DC Source
»Construction of digital AC power controller
»A remote controlled AC fan speed regulator using discrete integrated circuit
»Design and construction of a digital clock with calendar
»Remote controlled antenna
»The construction of automatic voltage inverter and a battery charger
»Design of 2.5kw automatic voltage regulation with seven segment display
»Simple sensitive touch alarm
»Design and installation of 200 WATT solar power system
»Construction of a car touch intruder alarm
»Design and construction of 2KVA inverter
»Design and construction of an automatic change over switch
»Automatic college bell with an announcement system
»Construction of a 2.5kw uninterruptible power supply (UPS) system

Upload Project

Do you have project materials to share? Upload and earn with it.