Development of biogas fuel plant from organic waste for cooking or electricity generation purpose in The Polytechnic Ibadan Department: Electrical Electronics Engineering By: harnubhoi Project ID: 7893 Rating: (5.0) votes: 1Rate this project12345 Price:₦4000 Get the Complete MaterialAbstractThis study aimed to design and construct a small-scale biogas production system using a 210-liter drum and store the generated gas in a tire tube. The objectives were to produce biogas from organic waste, develop a cost-effective storage solution, and evaluate the system's efficiency. The methodology involved feeding organic waste into the drum, allowing anaerobic digestion, and channeling the produced biogas into a tire tube for storage. The system was monitored for gas production, pressure, and composition. The major findings revealed a consistent biogas production rate of 0.5 cubic meters per day, with a methane content of 60%. The tire tube storage solution proved effective, holding up to 0.2 cubic meters of gas at 0.5 bar pressure. The conclusion drawn is that this low-cost, small-scale biogas production and storage system is a viable solution for rural communities and small-scale farmers, providing a sustainable energy source and reducing waste management challenges....Preview Download Preview +Other Electrical Electronics Engineering project topics and materials you might be interested in»The construction of a 2kva automatic voltage regulator (AVR)»Generation of Constant Power Supply from a DC Source»Design and construction of a digital clock with calendar»Construction of digital AC power controller»A remote controlled AC fan speed regulator using discrete integrated circuit»Remote controlled antenna»The construction of automatic voltage inverter and a battery charger»Design of 2.5kw automatic voltage regulation with seven segment display»Simple sensitive touch alarm»Construction of a car touch intruder alarm»Design and construction of 5kva power inverter»Design and construction of 2KVA inverter»Design and installation of 200 WATT solar power system»Construction of a battery charger»Design and construction of an automatic change over switch