Design of incinerator for handling medical waste in Federal Polytechnic Nekede, Owerri, Imo state Department: Civil Engineering By: Arinze1 Project ID: 5407 Rating: (3.2) votes: 11Rate this project12345 Price:₦4000 Get the Complete MaterialAbstractThe Federal Polytechnic Nekede Owerri Imo State medical Centre was visited for one week (or 7 days), with the view of monitoring the waste generation rate by the medical services. The waste was assembled each day and was taken to the laboratory to obtain its weight, and the cumulative weight of waste per week was obtained as 57.4kg/week. The waste was disposed into a rectangular container of known length, breadth, and height, which gave the cumulative volume of dumped waste as 5.69m3, which was used in making computation of what yielded the incinerator design breath to be 1.32m, design height as2.2m, and the design length as 1.98m. The incinerator chimney (flue) height was obtained as 5m, the length and breadth of the chimney were obtained as 0.6m X 0.6m, which will assist to emit toxic gaseous combustion products away from the point of combustion....Preview Download Preview +Other Civil Engineering project topics and materials you might be interested in»Comparing the compressive strength of concrete made with sand as fine aggregate and with chipping dust as fine aggregate»The comparative study of the compressive strength of concrete made with granite to that made with river round stone (pebble) and local stone»The use of computer in civil engineering»Importance of timber in civil engineering construction»Construction and Installation of a Panel Door»Construction of wardrobe key study on wood work»Effect of street trading on traffic performance and control»Assessment of different types of foundation and their mode of construction»Comparison of soil bearing capacity of different locations in Imo state»Investigation into the suitability of sand and gravel materials commonly used in building construction»Investigating the effect of partial replacement of cement with eggshell powder in concrete production»An investigation in to the causes of cracks in building and possible solutions - a case study of Kukar Gesa community in Katsina metropolis»Suitability of available laterite material in Ilorin East local government area for road construction»Determination of the causes, effects of environmental pollution and its possible control within Kwara and Osun state»Model for prediction of rainfall intensity in Lagos